Sekonic SR-6500 Instruções de Operação descarregar pdf (Página 54)

-53-

Printer settings

(when stacker unit or printer unit are installed)

A character is 12 x 9 pixels.

Though character height is ﬁ xed (about 3mm), widths can

vary.

However, the number of pixels (9 pixels) does not change,

so if you enlarge a character, the space between pixels

increases, making the character appear lighter.

Printer settings differ depending on the operating mode.

9 pixels

12 pixels



Printer control

You can set the device to either use the printer or not use it.

If you do not use the pinter function,set the invalid.

Press the

switch to enter the menu mode.

Use the

and

DOWN

switches to select the following parameters,

and press the

FEED/ENTER

switch.

Use the

and

DOWN

switches to select [Printer Control] setting,

and press the

FEED/ENTER

switch.

(“



” mark ﬂ ashes in the ﬁ rst column of the ﬁ rst line on the LCD.)

Use the

and

DOWN

switches to set the value.

Printer control

setting values

• Valid

• Invalid

Press the

FEED/ENTER

switch to save the setting value into memory.

(The ﬂ ashing “



” mark disappears from the LCD.)

Keep pressing the

CLEAR/EXIT

switch until it returns to normal mode,

or press the

switch to return to normal mode.

Printer settings



Printer control

SR-3565(E).indd 53SR-3565(E).indd 53 2007-8-16 10:20:002007-8-16 10:20:00

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 129 130

Comentários a estes Manuais

Sem comentários

Sekonic SR-6500 Instruções de Operação Página 54

Comentários a estes Manuais