Sekonic DIGI MASTER L-718 Instruções de Operação descarregar pdf (Página 9)

6. Display lighting

DIGI MASTER is equipped with a back-

ground illumination for LCD. Electro

luminescence ''ECLAT" illuminates the

LCD while the display-light key (D.L.) is

depressed (Fig. 12).

7. Running-lock for continuous

reading

The measuring switch can be locked for

continuous reading for ambient light.

(1) Switch the meter ON.

(2) Rotate the switch knob clockwise

until the slit on the knob matches to

the white dot while depressing the

knob.

(3) Release the locking function after the

reading is over. While the measuring

switch is locked, auto shut-off

function does not work.

<NOTE>

• Running-lock is only usable for

ambient light measurement, not for

flash light.

Wireless (cordless) Measurement using

Electronic Flash Unit

In case the photographing subject is too far to use synchro cord, or in case

the synchro cord disturbs photographing, flash light can be measured

without connecting the cord.

(2) Set the film speed (ISO) and

shutter speed (T) as shown in the

paragraphs for “Preparing the

Meter for Operation”.

(4) While the symbol is flashing (for

about 90sec.), fire the flash unit

by pressing its test button.

(5) The appropriate F-stop value is

displayed on the meter. The

measured value is indicated in dual

display by F-stop number with bar

symbols and bar-dot symbol marks

(Fig. 15).

• The display continues to indicate the

measured value for about 5 minutes

after measurement unless the

following measurement is made.

After this period of time the auto

shut-off circuit operates and turns

the display off.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Comentários a estes Manuais

Sem comentários

Sekonic DIGI MASTER L-718 Instruções de Operação Página 9

Comentários a estes Manuais

Manuais e produtos relacionados com Fotómetros Sekonic DIGI MASTER L-718